HDT系列料斗混合机 HDT Series hopper mixer
工作原理
该机由立柱、机座、回转叉架、驱动、制动、控制系统等部件组成。将混合料斗推入回转叉架并锁紧螺母，启动控制系统，将料斗提升到混合高度并可靠定位。驱动系统按设定的时间、转速等数据进行自动混合。混合作业结束，回转叉架垂直停止，料斗自动下降到地面，整机停止，并打印工艺数据。松开回转叉架的锁紧螺母，将料斗推出转到下一工序。
Working principle
The machine is composed of column, machine base, rotation crotch,driving system, braking system, control system, etc. Push the mixing hopperinto the rotation crotch and lock the nuts. Start the control system to liftthe hopper to the mixing height and position it reliably. The driving systemwill carry out automatic mixing according to the set time, rotation speed andother data. After the mixing operation is finished, the rotation crotch willstop vertically, the hopper will automatically fall to the ground, the machinewill stop and process data will be printed. Loosen the locknuts of the rotarycrotch and push the hopper out and transfer it to the next procedure.
